Filter
Top Products
128
Controls in detail
Memory function
The memory button and memory position
switch are located on the door.
1 Memory button
2 Memory position switch
̈ Switch on the ignition (୴ page 40).
or
̈ Open the respective door and insert
the SmartKey in the starter switch.
Storing positions into memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the
desired position (
୴ page 42).
̈ Turn memory position switch 2 to the
desired memory position.
̈ Press memory button 1.
̈ Release memory button 1 and press
memory position switch 2 within
3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
̈ Turn memory position switch 2 to the
desired memory position.
̈ Press and hold memory position
switch 2 until the seat, steering wheel
and exterior rear view mirrors have
completely moved to the stored
positions.
!
Do not operate the seats using the memory
button if the seat backrest is in an excessively re-
clined position. Doing so could cause damage to
front or rear seats.
First move the seat backrest to an upright
position.
i
Releasing the memory position switch stops
movement to the stored positions immediately.