Filter
Top Products
461
Practical hints
Flat tire
Mounting the Minispare wheel
1 Wheel bolt for light alloy rims
2 Wheel bolt for Minispare wheel,
(located in trunk with Minispare wheel)
̈ Clean contact surfaces of wheel and
wheel hub.
1 Alignment bolt
̈ Guide spare wheel onto the alignment
bolt and push it on.
̈ Insert wheel bolts and tighten them
slightly.
!
Wheel bolts 2 must be used when mount-
ing the Minispare wheel. The use of any wheel
bolts other than wheel bolts 2 for the Minispare
wheel will physically damage the vehicle’s
brakes.
!
To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Warning! G
Always replace wheel bolts that are
damaged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure to use the correct wheel bolts.
୴୴