Filter
Top Products
160
Controls in detail
Control system
Time/Date submenu
Access the
Time/Date
submenu via the
Settings...
menu. Use the
Time/Date
submenu to change the instrument cluster
display settings.
The following functions are available:
Setting time (hours)
This function can only be seen in vehicles
with audio system.
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Time - Hours Press
R To Confirm
appears in the multifunc-
tion display.
The selection marker is on the hour
setting.
̈ Press button æ or ç to set the
hour.
̈ Press the reset button in the instru-
ment cluster (
୴ page 138) to confirm.
The hour is set and stored.
Setting time (minutes)
This function can only be seen with audio
system.
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Time - Minute(s)
Press R To Confirm
appears in the
multifunction display.
The selection marker is on the minutes
setting.
Function Page
Setting the time (hours) 160
Setting the time (minutes) 160
Setting the date (month) 161
Setting the date (day) 161
Setting the date (year) 162
i
The
Time/Date
submenu is not shown in
vehicles with COMAND*.
i
Vehicles with COMAND*:
For information on setting the time in COMAND,
refer to the separate COMAND operating in-
structions.
i
Vehicles with COMAND*:
For information on setting the time in COMAND,
refer to the separate COMAND operating in-
structions.