Filter
Top Products
266
Controls in detail
Soft top (Cabriolet)
̈ Fold retaining lugs 6 out.
̈ Slide pre-assembled wind screen into
mounting fixture on right side 7 using
retaining pin on right side. Simulta-
neously, retaining lugs 6 should slide
into seat belt passage in rear bench
seat.
̈ Pull catch 8 in position 9 and guide
left retaining pin into mounting fixture
on left side.
̈ Fold upper section of wind screen up
toward head restraints until it stops.
Removing
̈ Fold upper section of wind screen back
down.
̈ Pull catch 8 in position 10 and pull
wind screen out toward front of vehi-
cle. Be careful not to damage interior
trim with guide tabs.
̈ Fold retaining lugs 6 back.
b Catch
̈ Press catch b to the right and fold up-
per and lower sections back.
̈ Place the wind screen back into the
bag.
6 Retaining lugs
7 Mounting fixture on right side
8 Catch
9 Locking
10 Unlocking
Warning! G
Check for secure locking by pulling up on
the wind screen.
To prevent personal injury, remove wind
screen if rear seats are to be occupied by
passengers.
୴୴