Filter
Top Products
91
Controls in detail
Locking and unlocking
Rear doors
̈ Pull up locking knob 1 on the respec-
tive rear door.
̈ Pull on door handle 2 on the respec-
tive rear door to open door.
Opening the liftgate
Opening the liftgate from outside
A minimum height clearance of 7 ft
(2.15 m) is required to open the liftgate.
The handle is located above the rear
license plate recess.
1 Grip molding
2 Handle
The vehicle must be unlocked.
̈ Pull on handle 2.
̈ Swing the liftgate upward by using the
grip molding 1.
Opening the liftgate from inside
A minimum height clearance of 7 ft
(2.15 m) is required to open the liftgate.
The release lever is located on the inside of
the liftgate.
1 Release lever
2 Catch
̈ To unlock the liftgate, move the
catch 2 to the right.
i
If the vehicle has previously been
locked from the outside using the
remote control, opening a door from
the inside will trigger the alarm.
To cancel the alarm, do one of the
following:
ț Switch on the ignition by turning
the key in the steering lock to
position 2.
ț Press the ‹ or Œ button on
the remote control.
!
Always make sure that there is suffi-
cient overhead clearance.
୴୴