Filter
Top Products
189
Controls in detail
Useful features
Trip computer*
The trip computer is located in the
overhead console.
1 RESET
2 MODE
3 Display
Switching on the trip computer
̈ Switch on ignition.
Display 3 shows one of the available
functions.
̈ If a function display does not appear,
press MODE 2.
Selecting functions
̈ Press MODE 2 repeatedly until the
desired display appears.
The functions are displayed in the
following order:
ț Date
ț Compass
ț Stop watch
ț Present fuel consumption
ț Average fuel consumption
ț Distance remaining
ț Country
ț Switching off trip computer
Setting the date
̈ Press MODE 2 repeatedly until the
date appears.
̈ Press RESET 1.
The month shown flashes.
̈ Press MODE 2 to advance to selected
month.
̈ Press RESET 1.
The day shown flashes.
̈ Press MODE 2 to advance to selected
day.
̈ Press RESET 1.
The year shown flashes.
̈ Press MODE 2 to advance to selected
year.
̈ Press RESET 1.
The display stops flashing and the date
is set.
i
With engine not running, the display
switches off automatically 30 seconds
after the last entry.