Filter
Top Products
37
Getting started
Adjusting
Seat backrest tilt
̈ Switch on ignition (୴ page 33).
̈ Turn handwheel 2 forward or back-
ward until your hands are slightly ang-
led when holding the steering wheel.
Seat height
̈ Switch on ignition (୴ page 33).
̈ Lift handle 3.
̈ Use your body weight to push the seat
downwards.
̈ Lift your weight off the seat to obtain a
higher seat position.
̈ Release lever 3.
Head restraint height
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
Lowering:
̈ To lower the head restraint, push
release button 1 and press down on
the head restraint.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.