Filter
Top Products
98
Controls in detail
Seats
Installing rear seat head restraints
̈ Insert head restraint and push it down
to the stop.
̈ Push release button 1 and adjust
head restraint to the desired position
(
୴ page 37).
Stowing rear center head restraint
1 Rear center head restraint
2 Bar
3 Clip
̈ Remove rear center head restraint
(
୴ page 97).
̈ If necessary, remove cargo floor plates,
see “Removing cargo floor plates”
(
୴ page 165).
̈ Slide rear seats forward, see “Adjusting
rear seat fore and aft” (
୴ page 100).
̈ Fold rear seat backrests down, see
“Folding down the backrest”
(
୴ page 100).
̈ From cargo compartment, attach rear
center head restraint 1 to underside
of rear center seat.
Make sure front side of head
restraint 1 is facing upward.
̈ Press bar 2 on both sides into
clips 3.
Heated seats*
Both switches for the front seats are loca-
ted in the center console.
1 Normal heating
2 Rapid heating
̈ Start the engine.
Switching on seat heating
̈ Press upper switch position 1.
A red indicator lamp on the switch
lights up.