Filter
Top Products
50
Getting started
Driving
Switching on headlamps
The combination switch is located on the
left of the steering column.
Combination switch
1 Off
2 Low beam headlamps on
̈ Turn combination switch to
position õ.
The low beam headlamps are switched
on.
For more information, see “Lighting”
(
୴ page 107).
Turn signals and high beam
The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
3 High beam
Turn signals
̈ Press combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp K or L in the instrument
cluster flashes.
The combination switch resets auto-
matically after major steering wheel
movements.
High beam
̈ Push combination switch forward in di-
rection of arrow 3.
The high beam indicator lamp A in
the instrument cluster comes on.
For more information, see “Lighting”
(
୴ page 107).
i
To signal minor directional changes,
move combination switch only to point
of resistance and release. The corre-
sponding turn signals will flash three
times.