Filter
Top Products
281
Practical hints
Replacing bulbs
License plate lamp
1 License plate lamp
2 Screw
̈ Loosen both screws 2.
̈ Remove license plate lamp 1.
̈ Replace the tubular bulb.
̈ Reinstall license plate lamp 1.
̈ Retighten screws 2.
High mounted brake lamp
1 Cover
2 Tab
̈ Press gently on both sides of cover 1
in direction of arrows.
̈ Fold it backwards and remove.
̈ Press tab 2 on the reflector and re-
move it.
̈ Press gently onto the bulb and turn
counterclockwise out of the bulb sock-
et.
̈ Press the new bulb gently into the bulb
socket and turn clockwise until it en-
gages.
̈ Reinstall the reflector on the left side
first and let it engage on the right side.
̈ Align cover 1 with its tabs in the slots
and press gently onto cover 1 until it
engages.
i
Vehicles with an exterior spare-wheel
rack*:
You cannot replace the LEDs of the
high mounted brake light with an exte-
rior spare-wheel rack installed. Have
therefore the high mounted brake light
checked and, if necessary, the LEDs re-
placed by an authorized
Mercedes-Benz Light Truck Center.