Filter
Top Products
56
Getting started
Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
Parking brake
1 Release handle
2 Parking brake
̈ Step firmly on parking brake 2.
When the engine is running, the indica-
tor lamp ; (USA only) or 3
(Canada only) in the instrument cluster
will be illuminated.
Warning! G
Vehicles with manual transmission:
Wait until the vehicle is stationary before
removing the SmartKey from the starter
switch. The vehicle cannot be steered when
the SmartKey is removed.
Warning! G
With the engine not running, there is no
power assistance for the brake and steering
system. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury as a re-
sult of vehicle movement, before turning off
the engine and leaving the vehicle always:
ț Keep right foot on brake pedal.
ț Firmly depress parking brake pedal.
ț Move the gear selector lever to
position P (manual transmission: first or
reverse gear).
ț Slowly release brake pedal.
ț When parked on an incline, turn front
wheels towards road curb.
ț Turn the SmartKey in the starter switch
to position 0 and remove the SmartKey
from the starter switch.
ț Take the SmartKey with you and lock
the vehicle when leaving.