Filter
Top Products
137
Controls in detail
Control system
Instrument cluster submenu
Access the
Instr.Cl.
submenu via the
Settings
menu. Use the
Instr.Cl.
submenu to change the instrument cluster
display settings.
The following functions are available:
Selecting temperature display mode
̈ Move the selection marker with
button æ or ç to the
Instr.Cl.
submenu.
̈ Press button j or k repeatedly
until the message
Temperature
indicator
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set tem-
perature unit to
°C
(degrees Celsius)
or
°F
(degrees Fahrenheit).
Selecting speedometer display mode
̈ Move the selection marker with
button æ or ç to the
Instr.Cl.
submenu.
̈ Press button j or k repeatedly
until the message
Disp.Unit
Speed/odo
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set
speedometer unit to
km
or
Miles
.
Function Page
Selecting temperature display
mode
137
Selecting speedometer display
mode
137
Selecting language 138
Selecting display (speed display
or outside temperature) for sta-
tus indicator
138