Filter
Top Products
38
Getting started
Adjusting
Power seat* adjustment
The seat adjustment switches are located
in each door.
1 Head restraint height
2 Seat height
3 Seat cushion tilt
4 Seat fore and aft adjustment
5 Backrest tilt
̈ Switch on the ignition (୴ page 33).
or
̈ Open the respective door.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 4.
Adjust seat to a comfortable seating
position that still allows you to reach
the accelerator/brake pedal safely.
The position should be as far to the rear
as possible, consistent with ability to
properly operate controls.
Seat cushion tilt
̈ Press the switch up or down in the
direction of arrow 3 until your upper
legs are lightly supported.
Seat backrest tilt
̈ Press the switch forward or backward
in the direction of arrow 5 until your
arms are slightly angled when holding
the steering wheel.
Seat height
̈ Press the switch up or down in the
direction of arrow 2.
Head restraint height
̈ Press the switch up or down in the di-
rection of arrow 1.
!
When moving the seats, make sure that
there are no items in the footwell or
behind the seats. Otherwise you could
damage the seats.
i
The memory function* (୴ page 107)
lets you store the settings for the seat
position together with the setting for
the steering wheel and the exterior rear
view mirrors.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.