Filter
Top Products
228
Controls in detail
Audio system
ter your PIN for 30 seconds (୴ page 228).
This display disappears when you press
any button.
When your mobile telephone is inserted
into the telephone cradle, you will see the
reception strength in the upper right-hand
corner of the display.
Switching on the telephone
Switching on the telephone
̈ Press h button.
If you have programmed an unlock
code for the telephone, you must now
enter the code.
̈ Enter code using buttons 1 to
R.
̈ If necessary, correct number entered
with the
CLR
soft key. Press soft key
briefly to delete the last digit entered;
press soft key and hold to delete the
complete number.
̈ Press
OK
soft key after entering correct
code.
The telephone is unlocked. If you have
entered an incorrect code, you must
enter the correct code.
Switching off the telephone
̈ Press h button for approximately
three seconds.
PROCESSING
appears in the display until
the telephone is off. Afterward,
PHONE
OFF
appears in the display.
Adjusting the volume
̈ Turn rotary control of N button dur-
ing a telephone call.
The volume will increase or decrease
depending on the direction turned.
i
The volume can be adjusted separately
for telephone mode and audio mode.