Filter
Top Products
246
Controls in detail
Panorama roof with power tilt/sliding panel*
Synchronizing the panorama roof with
power tilt/sliding panel and the roller
sunblinds
The tilt/sliding panel after must be
synchronized
ț after the battery has been
disconnected or discharged
ț after the tilt/sliding panel has been
closed manually
ț the tilt/sliding panel has been opened
with an abrupt movement
ț after a malfunction.
̈ Switch on the ignition (୴ page 33).
̈ Move and hold the roof panel switch in
direction of arrow 3 (
୴ page 242)
until the roller sunblind are fully closed.
Hold the roof panel switch for approxi-
mately one second.
̈ Move and hold the roof panel switch in
direction of arrow 4 until the roller
sunblinds are fully opened.
Hold the roof panel switch for
approximately one second.
̈ Move and hold the roof panel switch in
the direction of arrow 4 until the
tilt/sliding panel is approximately 4 in
(10 cm) opened.
Release the roof panel switch.
̈ Move and hold the roof panel switch in
the direction of arrow 3 until the
tilt/sliding panel is fully closed.
Hold the roof panel switch for
approximately one second.
̈ Check the Express-open feature of the
tilt/sliding panel (
୴ page 244).
If the tilt/sliding panel opens com-
pletely, the tilt/sliding panel is
synchronized. Otherwise repeat the
above steps.