Filter
Top Products
133
Controls in detail
Control system
̈ Press button k or j.
The stored messages will now be
displayed in the order in which they
have occurred. For malfunction and
warning messages, see “Vehicle status
messages in the multifunction display”
(
୴ page 347).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
Settings
menu there are two
functions:
ț The function
Reset to factory
settings
, with which you can reset all
the settings to the original factory
settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
Settings
menu appears in the
multifunction display.
Resetting all settings
You can reset all the functions of all
submenus to the factory settings.
̈ Press the reset button in the
instrument cluster (
୴ page 119) for
approximately three seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
̈ Press the reset button once more.
The functions of all the submenus will
reset to factory settings.
i
The vehicle status message memory
will be cleared when you turn the
SmartKey in the starter switch to
position 1 or 2. You will then only see
high-priority messages in the
multifunction display (
୴ page 347).