Filter
Top Products
231
Controls in detail
Audio system
̈ Press
MEM
soft key or press ‚ or
ƒ.
̈ Press
RCV
soft key (received calls).
The number of received calls and
then the call last received appear
briefly in the display.
̈ Select desired telephone number
with button ‚ or ƒ.
The letter
R
and the number of the
memory position appear in the up-
per left-hand corner of the display.
The numbers are stored in the order
of the calls received.
̈ When you have selected a number,
press s button.
The call will be made.
ț Speed dial
If you have stored telephone numbers
as speed dial numbers in your tele-
phone, you can also enter these with
buttons 1 to R on the radio unit.
̈ Press desired button 1 to R
briefly.
̈ Press s button.
The call will be made.
ț Turbo dial
If you have stored telephone numbers
as turbo dial numbers in your tele-
phone, you can also enter these with
buttons 1 to R on the radio unit.
̈ Press desired button 1 to R
until the call is made.
Redial
If the number you have dialed is busy, you
can again place calls to the last ten tele-
phone numbers dialed using the redial
function.
ț Manual redial
i
If you have activated the automatic re-
dial function on your mobile telephone,
the number of the person being called
is automatically redialed after a short
waiting period if there is a busy signal.
Refer to the separate operating instruc-
tions for the mobile telephone.