Filter
Top Products
Black plate (410,1)
2. Open the clip and slide the blade
assembly in the direction of the arrow.
3. Wrap a flathead screwdriver or similar
tool with a soft cloth to prevent
damage to the clip.
NOTE
Using a soft cloth-wrapped flathead
screwdriver.
4. Tilt the blade assembly and remove it
from the arm.
CAUTION
To prevent damage to the windshield
let the wiper arm down easily, don't
let it slap down on the windshield.
5. Pull down the blade rubber and slide it
out of blade holder.
6. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
8-28
Maintenance andCare
Owner Maintenance
CX-9_8V83-EA-06I_Edition3 Page410
Monday, February 26 2007 7:21 PM
Form No.8V83-EA-06I