Filter
Top Products
Black plate (20,1)
NOTE
l
Seat positions can also be called up with
the ignition switch in the ON position and
the doorclosed by pressing and holding the
programming button
― that has
been programmed to the desired seat
position.
l
If any of the following occurs, the seat
position call up function cancels:
l
A seat adjustment switch is operated.
l
The vehicle is moving or starts to move.
l
The selected programming button
― or the set button is pressed
again.
Operation using the advanced key/
retractable type key
With advanced key
Auxiliary key
Unlock button
Lock button
With retractable type key
Lock button
Unlock button
Programming
One seat position can be programmed into
each advanced key/retractable type key.
After the following conditions have been
met, operate the seat and the advanced
key/retractable type key to program the
seat positions.
l
The engine switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-6)
Height Adjustment (page 2-6)
2. If the driver's door is closed, open it.
3. Press and hold the unlock button of the
advanced key/retractable type key
while pressing the set button until a
beep sound is heard.
Seat position call up
Unlock the doors using the unlock button
on the advanced key/retractable type key,
and open the driver's door.
Erasing memory
After the following conditions have been
met, press and hold the lock button of the
advanced key/retractable type key while
pressing the set button until a beep sound
is heard.
l
The engine switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
2-8
Essential SafetyEquipment
Seats
CX-9_8V83-EA-06I_Edition3 Page20
Monday, February 26 2007 7:17 PM
Form No.8V83-EA-06I