Filter
Top Products
53Magellan MAP 330 GPS Receiver
Reference
Selecting a Map Datum — Allows you to set the datum used to compute
the coordinates to match the datum used on a map or chart. If you are
using a map or chart with your MAP 330 and the datums do not match,
you may find irregularities when comparing the coordinates.
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
Map Datum
Select Primary or
Secondary
ENTER
Select
Datum
ENTER
Default: Primary - WGS84 Secondary - WGS84
Selecting the Elevation Mode — Allows you to select the elevation mode
used by the MAP 330. You may choose between 3D (uses satellite
information to compute elevation) or 2D (displays a fixed elevation
based upon the elevation entered).
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
Elev Mode
Select
3D or 2D
ENTER
Default: 3D
Selecting the Time Format — Enables you to choose from three different
time formats: Local 24 Hr (military time), Local AM/PM or UTC.
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
Time Format
Select
Format
ENTER
If Local time is selected (24 hr. or
AM/PM) you will be prompted to enter
your local time.
Default: Local AM/PM