Magellan 330 Series GPS Receiver User Manual


 
22 Magellan MAP 330 GPS Receiver
Basic Operation
Basic Operation
GOTO routes are NOT saved in memory when the MAP
330 is turned off. If you are navigating on a GOTO route
and you need to turn the MAP 330 off, you will need to
restart the GOTO. Routes, however, are stored in memory.
If you need to make a GOTO but expect to turn the
MAP 330 off before arriving, you might consider making a 1-leg
route using the route menu. More information on routes can be
found in the Reference chapter of this manual.
These are just the basics of the MAP 330 and for many users this is all that they
will ever need. However, there are many more features in the MAP 330 that you
may want to become familiar with.
Multileg routes (numerous GOTOs strung together to make a single,
complex route).
Sunrise/Sunset and Lunar Information (allows you to see the time that the
sun will rise and set along with lunar phase for a given position and date).
Best Hunting and Fishing Times (Displays the best hunting and fishing
times for a given position. Real handy for hunters and boaters.)
Alarms and Alarm Messages (You can have the MAP 330 provide an
audible and visual alert for four different alarms: Anchor, Arrival, XTE or
GPS Fix.)
Setting up the MAP 330 (You can change many of the settings in the
MAP 330 to meet your requirements. All of the possible choices can be
found in the Setup Menu.)
Clearing the MAP 330’s memory (You can clear just a few or all of the
stored data that you entered into the MAP 330. Be careful, once you clear
the data, it is gone until you re-enter it.)
All of these and other features can be found in the Reference chapter of this
manual. Just refer to it as you need.
Again, thank you for joining the family of Magellan users and be sure to visit us
on the web at www.magellangps.com for any software updates, MAP 330
information and a host of other items that you may find useful.