109
A POI selected by the cursor (left), POI information screen (right).
NOTE:
Since the Go To Waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
ENT|EXIT while in the POI
Waypoint Information screen.
Find Interstate Highway Exits
1. From the Map Page, press MENU|↓ to HIGHWAY EXITS|ENT, which calls
up the Find Exit menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT, which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press ↑ or ↓
to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press
ENT|ENT. B.
Jump down to the lower selection list by pressing
ENT, then press ↓ or ↑
to select a highway from the list, then press
ENT.
