KTM 660SMC Motorcycle User Manual


 
ENGLISH
19
VITAL CHECKS AND CARE PROCEDURES TO BE CONDUCTED BY THE OWNER OR THE MECHANIC
Check oil level
Check brake fluid level
Check brake pads for wear
Check lighting system for proper operation
Check horn for proper operation
Lubricate and adjust actuating cables and nipples
Bleed fork legs in regular intervals
Remove and clean dust sleeves in regular intervals
Clean and lubricate chain as necessary ●●
Check chain tension ●●●
Clean air filter and filter box (depending on the dirt accumulation)
Check tire pressure and wear
Check coolant level
Check fuel lines for leaks
Drain float chamber
Verify smooth operation of all controls
Check brake performance ●●
Treat exposed metal components (except for the braking and exhaust
systems) with wax-based anti-corrosion agents
Treat steering lock and light switch with contact spray
Check all screws, nuts, and hose clamps for tight fit
once a yearfor cross
country use
after every
cleaning
before each
start