Filter
Top Products
ENGLISH
11
Combination switch
The light switch has 3 switch positions.
A = Light off
B = Low beam light
C = High beam light
The red short circuit button
1 serves to switch off the engine. Leave the
switch pressed, until the engine stops. With the button
2 the horn will
sound.
Flasher switch
The flasher switch is a separate unit and is mounted on the left portion of
the handlebar.
The wire harness is designed in a way that whenever you want to use your
bike off-road, you can dismount the entire turn indicator system without
affecting the function of the remaining electrical system.
Flasher left
Flasher right
Filler cap
To open filler cap: Turn the filler cap counter-clockwise.
To close filler cap: Screw on the filler cap clockwise.
Install tank breather hose
3 without kinks.
Fuel tap
OFF
In this position the fuel tap is closed. No fuel may flow to the carburetor.
ON When using the motorcycle, the rotating handle must be set to the
ON position. Now fuel may flow to carburetor. In this position the
tank empties down to the fuel reserve of approx. 2,5 liters.
RES The reserve tank, approximately 2,5 liters, cannot be tapped until the
rotating handle is turned to the RES position. Fill the tank as soon as
possible and remember to turn the rotating handle back to the ON
position so that you will have backup fuel next time, too.
Choke
If you pull the choke button 4 out as far as possible, a bore in the
carburetor will be opened through which the engine may take in additional
fuel. The result is a „fat“ fuel-air mixture of the type needed for cold starts.
To deactivate the choke, push the choke button back into its basic position.
A
B
2
N
O
O
F
F
R
E
S
F
U
E
L
N
O
O
F
F
R
E
S
F
U
E
L
N
O
O
F
F
R
E
S
F
U
E
L
RES
ON
OFF
1
C
3
4