Kenwood DDX812 GPS Receiver User Manual


 
94 DNX8120/DDX812/DDX8032BT
Zone Control
You can set the front and rear audio source.
1 Display Zone Control
Touch
in the "Audio
Control Menu" screen (page 92).
1
2
1 Displays the current source.
2 Returns to the "Audio Control Menu" screen.
2 Set the Zone Control
3
5
5
6
7
4
3 Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
4 Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
5 Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
6 Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
7 Returns to the "Audio Control Menu" screen.
Audio Control
• There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 64) and <Equalizer Control>
(page 93) are not available.
SRS WOW Control
You can set up the SRS WOW effect.
1 Display the SRS WOW Control
Touch
in the "Audio
Control Menu" screen (page 92).
1
3
1
2
1 Sets a SRS WOW.
You can select any of the following sound
fields.
"OFF"
"LOW"
"MIDDLE"
"HIGH"
"USER"
2 Switches to the Audio SRS Adjust screen.
See <SRS WOW User Setup> (page 95).
3 Returns to the "Audio Control Menu" screen.