Kenwood DDX812 GPS Receiver User Manual


 
English 73
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
Touch
in the "SETUP
Menu" screen (page 64).
2 Setup each item
1
2
3
4
6
5
1 Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT1 port. ( "VIDEO1")
3 Sets an image display of the system that is
connected via the AV INPUT2 port.
( "Off")
"Off": When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
"On": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
4 Sets a name to be displayed when you
select an image of the system that is
connected via the AV INPUT2 port.
( "VIDEO2")
5 Selects a navigation system connection.
( "RGB") (DDX812/DDX8032BT only)
"RGB": Allows the Kenwood’s Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation
system to connect via the AV INPUT1
port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
6 Returns to the "SETUP Menu" screen.
7
8
9
10
11
12
7 Returns to the "AV Interface 1" screen.
8 Moves to the "AV Interface 3" screen.
9 Selects an AV source to be output at the AV
OUTPUT port. ( "AV-IN1")
p Sets a method to switch to the rear view
camera video display. ( "Off")
"On": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"Off": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [NAV] button for
more than 1 second.
q You can flip the left and right of the rear
view camera video display. Set to "On" and
the the rear view will be displayed left and
right in mirror image on the screen.
( "Off")
w Returns to the "SETUP Menu" screen.
13
14
15
16
18
17
e Returns to the "AV Interface 2" screen.
r Selects speakers used for voice guidance of
the navigation system. ( "F-Left")
"F-Left": Uses the front left side speaker
for voice guidance.
"F-Right": Uses the front right side speaker
for voice guidance.
"Front All": Uses both front speakers for
voice guidance.
t Adjusts the volume for voice guidance of
the navigation system. ( "21")
Next page 3