Kawasaki ZX-6R Automobile User Manual


 
Wiring Routing
1. Vehicle-down Sensor 12. Main Throttle Sensor
2. Meter Assembly 13. Injector, Secondary
3. Shift Up Indicator Light 14. Injector, Primary
4. Right Handlebar Switch 15. Coolant Temperature Sensor
5. Left Handlebar Bar Switch 16. Speed Sensor
6. Intake Air Temperature Sensor 17. Crank Shaft Position Sensor
7. Boost Sensor 18. Gear Position Sensor
8. Cam Shaft Position Sensor 19. Battery (-)
9. Ignition Coil 20. Auto Shifter
10. Subthrottle Valve Actuator 21. Frame Ground
11. Cylinder Head Ground 22. Regulator
The headlight beam (Hi/Lo) change switch on the left handlebar switch works as a speed
limit switch of the pit-road and passing switch works as same also.
In case of using optional meter, the connector of coolant temperature sensor “15” must
used.
The auto shifter “20” should be used according to local regulation.
42