Filter
Top Products
Radiator Installation
Use the radiator stay (35063-0439) and bracket (11054-1818) belong to kit, and fasten
the radiator to the Crankcase by bolts as shown in the figure.
Stay has several installation holes. Install position is adjustable for proper position of
radiator.
Some muffler may interfere with stay. In such case, make appropriate stay yourself.
Machine the original cowl to meet the outline of radiator.
Standard Resave tank is not available. Use some appropriate tank.
Fill the space between the cowl and the sides of radiator by fixing a sponge or the like.
NOTE
After radiator’s installation, be sure to check that there is no interference between the
radiator and the manifold, or fender, tire and the front fork full bottomed.
If you don’t use water temperature meter, use standard pipe, not oil cooler hose
(39062-0220). Nipple of radiator is plugged by CAP (11065-1056).
27