Filter
Top Products
Preparation
Before Installing
Modify the parts based on your race regulation.
To avoid misuse keep the parts replaced with the kit parts separate.
When reusing parts, clean them and check them for damage or deterioration.
Main Removal Parts:
Lights
Rear View Mirrors
Side Stand
Starter Lockout Switch
Remove the side stand switch. When the optional main harness is not used, connect
removing Black/Yellow and Green/White Leads directly.
Racing Kit Parts
Also, we have provided the spare parts, and other optional parts (engine, frame, and
electric parts) for racing. So please order each parts referring to the “Racing Kit Parts List”
in the back of this manual.
Engine Parts Installation
Air Intake Parts
Remove the wire net of Ram – Air duct intake to reduce the air flow resistance.
Remove the tank (16181-0011) to reduce the weight. Plug the holes firmly with a tape.
The air pressure in the duct rises during high speed operation because the Ram Air
System is used.
A. Wire Net (14037-0057)
B. Tank (16181-0011)
9