Filter
Top Products
Water Hose Installation
Radiator inlet
Divide the original water hose (39062-0156) at suitable position, and insert the hose
between cylinder head and radiator.
1. Water Hose 39062-0156
Insert the water hose (39062-0220) between oil cooler outlet and radiator.
Radiator outlet
Apply a non-permanent locking agent to the thread of the water temperature sensor (Kit:
for Meter Lamp). Mount the sensor on the pipe (39192-0011).
Insert the ground terminal of the water temperature sensor lead between the hose and
the pipe, and clamp the hose as shown in the figure. Fasten the another terminal to the
cover (generator) by the bolt.
* If you don’t use water temperature meter, use standard pipe and hose at oilcooler outlet
side and cover it radiator side with cap (11065-1056).
28