Filter
Top Products
Standard Selection of Shim
Total Thickness of Clutch Plates Size of Shim Remarks
Approx. 40.7 mm 2.0 mm
P/No. 92180-0149
Original Setting
40.2 mm 1.5 mm P/No. 92026-1590
39.5 ~ 40 mm 1.2 mm 92025-1137
Transmission
Remove the three steel balls (600A0500) from the output shaft assembly.
Take kit and optional transmission gears are available to be closer to each gear ratio.
Transmission Shimming
By using washers with various thickness, keep the axial clearance between 0.3 mm and
0.5 mm, to prevent the seizure of gears and to keep smooth gear-shifting.
Thickness Part No.
1.6 mm 92200-0050 Original
1.8mm 92200-0231 Kit
Spline washer (input)
1.4 mm 92200-0230 Kit
1.4 mm 92200-0138 Original
1.6 mm 92022-212 Production part
Plane washer
(input, output)
1.8 mm 92202-1722 Production part
1. Spline washer (input)
2. Plane washer
24