Filter
Top Products
DISASSEMBLY, REASSEMBLY, INSPECTION, AND MAINTENANCE 3-11
Cooling System
All the cooling fans of the FE series engines are the separate type
that can be separated from the flywheel.
FE290 type:
NOTE
On the engine produced before May 1996, the flywheel and the
cooling fan are integrated and cannot be disassembled.
•
A separate type cooling fan can be assembled by aligning the concave
portions along the circumference of the fan with the magnets on the
flywheel.
•
Clean the cooling fan blades if they have debris or dust on them.
•
If the fan blades are damaged, replace the cooling fan with a new
one.
A: Convex Area of Cooling Fan
B: Mgnet Portion
C: FE120D-AB00 only