Filter
Top Products
DISASSEMBLY, REASSEMBLY, INSPECTION, AND MAINTENANCE 3-65
Camshaft
Apply these measurements on the crankshaft shim selection table,
and select the next thinner shim.
For example, on the FE350D, if measurement [A] is 13.41 mm and
measurement [B] is 14.09 mm, the correct shim thickness is t = 0.4
mm.
For example, on the FE350G, if measurement [A] is 15.85 mm and
measurement [B] is 17.70 mm, the correct shim thickness is t =1.60
mm.
Cam Shaft Axial Play Standard and Service Limit (maximum)
- for Type G (Unit: mm)
Srandard Service Limit
FE120, 170 0.08 ~ 0.34 (0.0031 ~ 0.0134 in) 0.50 (0.0197 in)
FE250 0.05 ~ 0.17 (0.0020 ~ 0.0067 in) 0.35 (0.0138 in)
FE290, 350, 400 0.07 ~ 0.21 (0.0028 ~ 0.0083 in) 0.35 (0.0138 in)