Kawasaki FE120 Automobile Parts User Manual


 
SERVICE DATA 2-3
Service Specifications
Service Limit (mm)
FE120 FE170 FE250Item
Type D Type G Type D Type G Type D Type G
Connecting Rod
Connecting Rod Big End Bore (maximum) 26.052 29.052 34.067
(1.0257 in) (1.1438 in) (1.3412 in)
Connecting Rod Small End Bore (maximum) 14.042 16.047 18.051
(0.5528 in) (0.6318 in) (0.7107 in)
Connecting Rod Bend and Twist (maximum) 0.15/100
(0.006/100 in)
Dynamic Balancer
Balancer Shaft Journal Diameter
PTO Side (minimum) ––– 14.943 –––
(0.5883 in)
Flywheel Side (minimum) ––– 14.933 –––
(0.5883 in)
Weight Guide Hole Bore (maximum) ––– ––– 26.118
(1.0283 in)
Balancer Guide Diameter (minimum) ––– ––– 25.907
Link Rod Bearing Bore (1.0200 in)
Small End Bore (maximum) ––– ––– 12.057
(0.4747 in)
Big End Bore (maximum) ––– ––– 47.106
(1.8546 in)
Piston
Piston Ring/Groove Clearance (with new rings)
Top Ring (maximum) 0.15
(0.0059 in)
Second Ring (maximum) 0.12
(0.0047 in)
Piston Pin Hole Bore (maximum) 14.033 16.033 18.033
(0.5525 in) (0.6312 in) (0.7100 in)
Piston Pin Diameter (minimum) 13.975 15.975 17.975
(0.5502 in) (0.6289 in) (0.7077 in)