Filter
Top Products
Page 20 For technical questions, please call 1-800-444-3353. Item 90154
SAFETY OPERATION MAINTENANCEASSEMBLY
• Speed Rating- The speed rating denotes the
speed at which a tire is designed to be driven for
extended periods of time. This does not indicate
that the vehicle or rims can safely reach or
maintain that speed. These ratings are listed below.
(The markings on the example tire diagram show M.
The markings on your tire may differ.)
Note: You may not find this information on
all tires because it is not required by law.
Code MPH
F 50
G 56
J 62
K 68
L 75
M 81
Code MPH
N 87
P 94
Q 100
R 106
S 112
T 118
Code MPH
U 124
H 130
V 149
Z 149
W 168
Y 186
Table B: Tire Speed Rating Codes
• Tire Ply Composition and Materials Used-
The number of plies indicates the number of layers of
rubber-coated fabric in the tire.
In general, the greater the number of plies, the more
weight a tire can support. Tire manufacturers
also must indicate the materials in the tire, which
include steel, nylon, polyester, and others.
• Maximum Permissible Inflation Pressure-
This number is the greatest amount of air
pressure that should ever be put in the
tire under normal driving conditions.
Tire Inflation and Load Limit
Tire and Loading Information Placard
TIRE AND LOADING INFORMATION
The weight of cargo should never exceed 541 kg or 1195 lb.
TIRE SIZE COLD TIRE PRESSURE
SEE OWNER’S
MANUAL FOR
ADDITIONAL
INFORMATION.
FRONT 4.80/4.00-12 410 kPa, 60 PSI
REAR NONE NONE
SPARE NONE NONE
09g
MODEL 90154
Figure Q: Tire and Loading Information Placard Location
The Tire and Loading Information Placard displays the cold tire inflation pressure and the load limit
for this vehicle. See the Tire Care section starting on the following page for an explanation of tire
pressure and see the Vehicle Load Limit following that for an explanation of load limit.