Filter
Top Products
2 Oregon Series Owner’s Manual
Getting Started
The Oregon uses two AA batteries.
Use alkaline, NiMH, or lithium
batteries. Use precharged NiMH or
lithium batteries for the best results.
Standard alkaline batteries are not
recommended for Oregon 550 units
when using the camera feature.
1. Lift the latch, and remove the
battery cover.
Latch
Battery cover
Weather cap
2. Insert the batteries, observing
polarity.
3. Replace the battery cover, and
push the latch down.
1. Touch > >
.
2. Touch , , or
.
Remove the batteries when you do
not plan to use the Oregon for several
months. Stored data is not lost when
batteries are removed.
1. To turn on the Oregon, press .
2. To turn off the Oregon, press and
hold
.