Filter
Top Products
Oregon Series Owner’s Manual 25
Customizing the Oregon
Touch > >
. This
prole is a copy of your current
prole. The new prole becomes
your current prole.
Touch Setup > System.
GPS—select Normal, WAAS
(Wide Area Augmentation System),
or Demo Mode (GPS off). For
information about WAAS, go to
www.garmin.com/aboutGPS
/waas.html.
Language—select the text language
on the Oregon. Changing the text
language does not change the
language of user-entered data or map
data, such as street names.
Battery Type—select the type of
battery you are using.
Tones—turn audible tones On or
Off.
Interface—set the Oregon serial
interface:
• Garmin Spanner—allows you
to use the Oregon USB port with
most NMEA 0183-compliant
mapping programs by creating a
virtual serial port.
• Garmin Serial—Garmin
proprietary format used to
provide PVT protocol data.
• NMEA In/Out—provides
standard NMEA 0183 output and
input.
• Text Out—provides simple
ASCII text output of location and
velocity information.
• RTCM —receive differential
corrections from a RTCM
beacon.