Filter
Top Products
Forerunner 405 Owner’s Manual 13
Training Mode
Start and Lap—marks a lap
at the GPS location where
you press start and at any
locations during the run where
you pressed lap.
Mark and Lap—marks a lap
at the specic GPS location
you mark when you select
this option and at any location
during the run where you
pressed lap.
3. Press
quit to exit.
NOTE: When doing a course
(page 19), use By Position
to mark laps at all of the lap
positions marked in the course.
Auto Scroll
Use the auto scroll feature to
automatically cycle through all of the
training data pages while the timer is
running.
•
•
To use auto scroll:
1. Touch and hold menu > select
Training > Options > Auto
Scroll.
2. Select a display speed:
Slow,
Medium, or Fast.
3. Press
quit to exit.
Timeout
Touch and hold menu > select
Training > Options > Timeout.
Select Off to disable your Forerunner
from going to power save mode
when you are in Training mode.
Select Enabled to use the automatic
power save mode in all modes.
NOTE: Your Forerunner will
only go into power save mode
after a period of inactivity.