Filter
Top Products
zūmo 600 Series Owner’s Manual 3
Customizing the zūmo
Add (or Subscriptions > Add)—add a
new subscription to a trafc service. Go to
www.garmin.com/fmtrafc to purchase a
subscription.
The trafc subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM trafc receivers, you must
obtain a new code for each receiver.
Changing Bluetooth
Technology Settings
Touch Tools > Settings > Bluetooth.
Phone or Audio—select Add > OK to pair
with a device that has Bluetooth wireless
technology. To listen to high-quality audio
wirelessly, connect to a Bluetooth headset.
See pages 20–22. Select Change to pair and
connect with a different device. The zūmo
PIN code (or passkey) is 1234.
Drop—select the device you want to
disconnect, and touch Yes.
Remove
—select the device you want to
delete from the zūmo memory, and touch
Yes.
Bluetooth—enable and disable the
Bluetooth component. The Bluetooth
icon appears on the Menu page if the
Bluetooth component is enabled. To prevent
a device from automatically connecting,
select Disabled.
Friendly Name
—enter a friendly name
that identies your zūmo on devices with
Bluetooth technology. Touch Done.
Restore
—restore the original Bluetooth
settings. This does not clear the pairing
information.
Changing the Proximity
Points Settings
You must have proximity points (such as
custom POIs, a safety camera database,
or a TourGuide
®
le) loaded to adjust the
proximity point settings. See pages 38–39.
Touch Tools > Settings > Proximity Points.
Proximity Alerts—touch Change to turn the
alerts on or off when you approach custom
POIs or safety cameras.
TourGuide
—set how you want the audio for
TourGuide to be activated. Select Auto Play
to hear the complete tour as programmed,
Prompted to show the speaker icon on
the map when tour information is available
during your route, or Off.
Restore
—restore the original proximity
points settings.