Filter
Top Products
zūmo 600 Series Owner’s Manual
Getting Started
Using the Menu Page
➊
➋
➌
➍
➏
➒➑
➐
➎
➓
➊
GPS satellite strength.
➋
Bluetooth
®
technology status.
➌
Touch to select motorcycle, scooter,
automobile, or pedestrian mode.
➍
Battery status.
➎
Current time. Touch to change settings.
➏
Touch to nd a destination.
➐
Touch to view the map.
➑
Touch to make a call when connected to
a compatible mobile phone.
➒
Touch to adjust the volume.
➓
Touch to use the tools such as settings,
Where Am I?, Help, and routes.
Selecting a Usage Mode
Automobile
Pedestrian
Motorcycle
Scooter
Your zūmo offers several usage modes for
different modes of transportation. Routing
and navigation are calculated differently
based on your usage mode. For example,
one-way streets are treated differently in
walking mode than they are in driving mode.
When you place your zūmo in a mount that
does not correspond to its current usage
mode, the zūmo will ask you whether you
want to change usage modes.
To change your usage mode:
1. Touch the usage mode icon.
2. Select a mode, and touch OK.
3. Touch Yes, and follow the on‑screen
instructions to congure your settings.
Conguring Your zūmo
Your unit should turn on automatically if it
is plugged in and your vehicle is running.
To manually turn on your zūmo, press
the Power key. Follow the on-screen
instructions.
Acquiring Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the zūmo.
Acquiring satellite signals may take a few
minutes. The bars indicate GPS
satellite strength. When one bar is green, the
zūmo has acquired satellite signals. Now you
can select a destination and navigate to it.