Filter
Top Products
zūmo 600 Series Owner’s Manual 21
Using Hands‑free Calling
Pairing the zūmo with Your
Mobile Phone
1. Enable the Bluetooth setting on your
zūmo. Touch Tools > Settings >
Bluetooth.
2. Select Enabled.
3. Touch Tools > Settings > Bluetooth.
4. Under Phone, touch Add (or Change).
5. Enable the Bluetooth component on your
phone. Enable Find Me/Discoverable/
Visible mode. These settings might be in
a menu called Bluetooth, Connections, or
Hands‑free.
5. Touch OK on the zūmo.
6. Select your phone, and touch OK.
7. Enter 1234 into your phone.
Receiving a Call
When you receive a call, the Incoming Call
window appears. Touch Answer to answer
the call. Touch Ignore to ignore the call and
silence the ring.
The internal microphone is in the front of the
zūmo.
In a Call
To end a call, touch > End Call. Touch
> Call Options for the following options:
Touch Tones—displays a keypad page so
you can use automated systems, such as
voice mail.
Transfer Audio To Phone
—this is
helpful if you want to turn off the zūmo
but stay on the call, or if you need
privacy. To switch back, touch Transfer
Audio To Device.
Mute Microphone.
•
•
•
Phone Menu
From the Menu page, touch Phone to view
the Phone menu. Touch Status to view the
signal strength, the battery level, and the
name of the connected phone.
NOTE: Not all phones support all features
of the zūmo Phone menu.
Using Your Phone Book
Each time your mobile phone connects with
the zūmo, the phone book is automatically
loaded into the zūmo. It may take a few
minutes for the phone book to be available.
1. Touch Phone > Phone Book.
2. Touch the phone book entry (contact) you
want to call.
3. Touch Dial to call the contact.