Filter
Top Products
The GPS 165 lets you create up to 20 routes (numbered 0 through 19), with up
to 31 waypoints each. Routes are created, copied and edited through the
R
key,
which features five route pages selectable from the GPS 165’s outer knob.
The five route pages can be divided into two types: active route pages and a
route catalog page. Active route pages provide information and editing functions for
Route 0, which always serves as the route you are currently navigating. The route
review page serves as the main page for creating, editing, activating, deleting and
copying all routes. Routes 1-19 are used as storage routes, which are stored in the
GPS 165’s internal memory. Once a storage route is ‘activated’, a copy is placed into
Route 0 for navigation until it is cancelled, overwritten by activating another route or
erased when the GPS is turned off. If you want to save a route currently in Route 0,
be sure to copy it to an open storage route (routes 1-19) before it is cancelled, over-
written or erased.
50
DIRECT-TO & ROUTE NAV
Route Pages
REMEMBER!
If you want to save the active route, be sure to
copy it to an open storage route before turning the
GPS 165 off or activating a new route or direct-to
destination. See page 54 for instructions on copy-
ing routes.
Route Catalog Page
Approach Select Page
SID Select Page STAR Select Page
Active Route Page
165 manual 7/13/98 3:59 PM Page 50