Filter
Top Products
NAV Menu 1.
CDI page.
NAV Menu 2.
After the GPS 165 acquires satellites and computes a position, the Position page
will appear automatically, and you’ll be informed with a ‘Ready for navigation’ mes-
sage on the message page.
The Position page displays your present latitude and longitude, altitude and a
reference waypoint field, and is also used to enter barometric pressure during
approach operations. The altitude and reference waypoint fields are also selectable
(see Section 1 for more information) to allow you to configure the unit to your own
preferences. The default settings are:
• Altitude— Your present GPS altitude
• Present Position— Latitude and longitude displayed in degrees/minutes
• Reference Waypoint— The bearing and distance to the nearest airport
The Position page is one of four pages available under the GPS 165’s NAV key:
The Position page, CDI page, NAV Menu 1 and NAV Menu 2. During most flights, the
Position page and the CDI (course deviation indicator) page will be the primary pages
used for navigation. The pages available under each key are accessible by pressing the
desired key and rotating the outer knob, or by pressing the NAV key repeatedly.
3
INTRODUCTION
Flying Start
Altitude
Field
Reference Waypoint Field
Position Field
165 manual 7/13/98 3:58 PM Page 3