Filter
Top Products
To restore user data from a UserData card to the GPS 165:
1. Install the UserData card.
2. Turn the GPS 165 on using
B
.
3. Use
O
O
to highlight ‘Restore user data?’ and press
E
.
The GPS 165 will ask you which type of data to replace. You may choose check-
lists, scheduler messages, user waypoints, proximity waypoints, routes, waypoint
comments or all data.
4. Use
K
to select the type of data to replace.
You may either replace or update the information in the database. Replacing the
data will replace ALL user data with the data from the card. Updating the data will
not delete unrelated material, it will only change what is necessary to use the data
received from the UserData card.
5. Use
O
to select either ‘Replace?’ or ‘Update?’.
6. Press
E
to begin transferring data to the GPS 165. The GPS 165 will now transfer all
of the data requested. This may take several minutes.
7. To perform additional data transfer types, repeat steps 4- 6. Otherwise, press
E.
8. Turn the GPS 165 off and replace the UserData card with a NavData® card. The GPS
165 is now ready for normal operation.
95
APPENDIX A
NavData Card Operation
The GPS 165 must be turned off to remove and
install the NavData card.
Restoring data from a user data card.
165 manual 7/13/98 4:00 PM Page 95