Filter
Top Products
Navigation
18 Montana 600 Series Owner’s Manual
Navigating a Driving Route
CAUTION
You can permanently damage your ears
and lose hearing if you listen to the
device, earbuds, or headphones at high
volume. Limit the amount of time you
listen at high volume. If you experience
ringing in your ears or mufed speech,
stop listening and have your hearing
checked.
Before you can use the map, you must
purchase and load City Navigator
maps. If you plan to use an auto mount
accessory with the device, you must
also purchase and install the mount in
your vehicle.
1. Select an option:
• If you are using a mount with
the device, install the device in
the mount.
Automotive prole is selected
automatically.
• If you are not using a mount
with the device, select
>
> .
2. If you are not using a mount with
the device, connect headphones or
an audio line-out cable to the stereo
headphone jack.
3. Use the map to navigate to the
destination.
4. Listen to the voice prompts.
: If nothing is connected to
the headphone jack, audio tones
will replace the voice prompts.
5. Follow the turns in the text bar
along the top of the map.