Furuno FA-150 Radar Detector User Manual


 
iv
The main features are
Safety of navigation by automatically exchanging navigational data between ships and
between ship and coast.
Static data:
- MMSI (Maritime Mobile Service Identity)
- IMO number (where available)
- Call sign & name
- Length and beam
- Type of ship
- Location of position-fixing antenna on the ship
Dynamic data:
- Ship’s position with accuracy indication and integrity status
- Universal Time Coordinated (UTC)
- Course over ground (COG)
- Speed over ground (SOG)
- Heading
- Rate of turn (ROT) where available
Voyage-related data
- Ship’s draught
- Navigation status (manual input)
- Hazardous cargo (type)
- Destination and ETA (at master’s discretion)
Short safety-related messages, Free messages
LCD panel satisfying the IMO minimum requirements plus simple plotting modes
Interfaces for radar, ECDIS, PC for future networking expansion
GPS/VHF combined antenna for easy installation available
CPA/TCPA alarm
Built-in GPS receiver for UTC synchronization and backup position-fixing device
Important Notices
No part of this manual may be copied or reproduced without written permission.
If this manual is lost or worn, contact your dealer about replacement.
The contents of this manual and equipment specifications are subject to change without
notice.
The example screens (or illustrations) shown in this manual may not match the screens
you see on your display. The screen you see depends on your system configuration and
equipment settings.
This manual is intended for use by native speakers of English.
FURUNO will assume no responsibility for the damage caused by improper use or
modification of the equipment or claims of loss of profit by a third party.