Furuno FA-150 Radar Detector User Manual


 
1. OPERATION
1-35
1.12 Viewing Initial Settings
The INITIAL SETTINGS menu, which is locked with a password, is where the
installer enters ship’s MMSI, internal and external antenna positions, ship type
and I/O port settings. You can view the settings on this menu as follows.
1. Press the MENU to open the menu.
2. Use the CursorPad to choose INITIAL SETTINGS and then press the ENT
key.
3. Press the ENT key twice.
4. Use the CursorPad to choose item to view and then press the ENT key.
QUIT [MENU]
[INITIAL SETTINGS]
VIEW MMSI
VIEW INT ANT POS.
VIEW EXT ANT POS.
VIEW SHIP TYPE
VIEW I/O PORT
QUIT [MENU]
[VIEW MMSI]
MMSI : 999999999
IMO NO : 009999999
NAME : FURUNO
C. SIN : FQC3544
QUIT [MENU]
[VIEW SHIP TYPE]
TYPE NO : 0
***
TYPE DETAIL
*****
NOT AVAILABLE
[VIEW EXT ANT POS.]
A: 45m
B: 15m
C: 8m
D: 7m
QUIT[MENU]
A
B
C D
[VIEW INT ANT POS.]
A: 45m
B: 15m
C: 8m
D: 7m
QUIT[MENU]
A
B
C D
[VIEW I/O PORT]
VIEW COM PORT
VIEW PC PORT
VIEW LAN PORT*
VIEW PRIORITY
Choose port to view and
press the [ENT] key.
QUIT [MENU]
* Shown when
optional LAN
kit is installed.
INITIAL SETTINGS menus