Filter
Top Products
1. OPERATIONAL OVERVIEW
1-4
1.2 Inserting a Chart Card
Your unit reads SD cards, in the following formats: Navionics GOLD Chart cards or C-MAP
NT MAX chart cards, depending on the type of display unit you have. Insert the appropriate
chart card for your area as follows:
1. Open the chart drive.
Chart slot
Display unit
2. Insert chart card label side up.
3. Close the lid.
To remove chart card, push the card once and then pull it out.
Note 1: Do not remove a card while the chart is being drawn. This may cause the
equipment to freeze.
Note 2: Do not insert or remove a card while the power is on. This may cause the
equipment to freeze.
Note 3: For multiple display units, do not use the same chart card type in more than one
display unit.
Note 4: Remove the card with care; rough handling can damage the card and destroy its
contents.