Filter
Top Products
3. PLOTTER OPERATION
3-33
3.9 Routes
Often a trip from one place to another involves several course changes, requiring a series
of route points (waypoints) which you navigate to, one after another. The sequence of
waypoints leading to the ultimate destination is called a route. Your unit can automatically
advance to the next waypoint on a route, so you do not have to change the destination
waypoint repeatedly.
You can store up to 200 routes, and a route may have 35 waypoints.
3.9.1 Creating routes
Entering a route with existing waypoints
This method constructs routes by using existing waypoints. This function requires SAFE
ROUTE CHECK (C-MAP only).
1. Press the MENU key.
2. Press the C: WAYPOINTS/ROUTES soft key.
3. Press the B: ROUTES soft key to open the ROUTE menu. (No data will be shown if
there are no routes entered.)
ROUTE
Route name
Total length of route
Number of waypoints
in route
▲
001
WAYPOINTS
35
LENGTH
25.6 nm
002
WAYPOINTS
2
LENGTH
56.7 nm
003
WAYPOINTS
3
LENGTH
21.1 nm
004
WAYPOINTS
3
LENGTH
21.1 nm
PUSH ENTER KNOB TO
SEARCH FOR
---
NEW
ROUTE
B
RETURNE
GOTOA
EDIT
ROUTE
C
ERASE
ROUTE
D
1/20
Route menu
4. Press the B: NEW ROUTE soft key to open the new route entry screen.