Filter
Top Products
3. PLOTTER OPERATION
3-19
10. Use the Trackball to select one of the following:
ON or OFF (no ARP or AIS): Turn on or off target tracks
ARP ONLY (ARP equipped): Show only ARP tracks.
AIS ONLY (AIS equipped): Show only AIS tracks.
BOTH: Show both ARP and AIS tracks.
11. Press the C: ENTER soft key.
12. Press the MENU key to close the menu.
3.6.2 Stopping, restarting plotting of own ship track
When your boat is at anchor or returning to port you probably won’t need to record its track.
You can stop recording the track, to conserve the track memory, as follows:
1. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS
CONTROL soft keys to open the TRACK CONTROL menu.
TRACK
CONTROL
TRACK
CONTROL
▲
▲
Trackisplotted
Tracknotplotted
OWNSHIPTRACKDISP ON
OWNSHIPTRACKCOLOR RED
TARGETTRACKDISPLAY ON
TARGETTRACKCOLOR WHITE
INTERVAL TIME
TIMEINTERVAL 00m10s
DISTANCEINTERVAL 00.10nm
MEMORY(TRACK&MARK) 2000POINTS
(MARKMEMORY) (6000)POINTS
SHIP'STRACKSTATUS
NOTTRACKING
TRACK:1234/2000
MARK:9/6000
OWNSHIPTRACKDISP ON
OWNSHIPTRACKCOLOR RED
TARGETTRACKDISPLAY ON
TARGETTRACKCOLOR WHITE
INTERVAL TIME
TIMEINTERVAL 00m10s
DISTANCEINTERVAL 00.10nm
MEMORY(TRACK&MARK) 2000POINTS
(MARKMEMORY) (6000)POINTS
SHIP'STRACKSTATUS
TRACKING
TRACK:1234/2000
MARK:9/6000
RETURNE
EDITA
EDITA
MARK
SETUP
D
ERASE
T & M
C
RETURNE
MARK
SETUP
D
ERASE
T & M
C
B
TRACK
RESUME
B
TRACK
RESUME
B
TRACK
HALT
B
TRACK
HALT
Track control menu
2. Press the B: TRACK RESUME soft key. The soft key now shows “TRACK HALT” and
the indication “TRACKING” in the SHIP’S TRACK STATUS window changes to “NOT
TRACKING.” In addition, the icon “H” is displayed at the top of the plotter display and
own ship marker becomes a hollow circle. To restart plotting the track, press the B:
TRACK HALT soft key
3. Press the MENU key to close the menu.
3.6.3 Changing track color
Track can be displayed in red (default setting), yellow, green, light-blue, purple, blue and
white. It can be useful to change track color on a regular basis to discriminate between
previous day’s track, etc.
Own ship’s track
1. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS
CONTROL soft keys to open the TRACK CONTROL menu.
2. Use the Trackball to select OWN SHIP TRACK COLOR.
3. Press the A: EDIT soft key to display the track color window.